Date: Sun, 24 Jan 1999 16:40:05 -0500
From: "Minstrel in the Gallery" <>
Subject: Re: Front pads - dumb question - please help

I think Bart was trying to say that it is a screwing action. The cylinder is not threaded, but the clockwise turning motion resets the cylinder. You can then apply pressure, say with a 2x4, and gently depress the cylinder - be careful not to damage the seals around the cylinder. Good idea with the 45 degree needle nose pliers. Minstrel

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2018 - The Saab Network -
For usage guidelines, see the Mission and Purpose Page.
[Contact | Site Map | on Facebook | on Twitter | Shop Amazon via TSN | Site Donations]