Date: Wed, 3 Mar 1999 10:06:29 -0500 From: "Eric Law" <elawnopsamexxx.com> Subject: Re: Brake light stays on
Yeah, it's busted! Seriously, if you've disconnected the wires at the reservoir cap, and the light is still on, that rules out any problem with the fluid itself, or the level switch. And I disagree with SSPlenham's response, I think if the connectors were corroded, the light would stay *off*, not on. In the 900 model, the "brake" light also means "emergency brake". There's a switch beneath the e-brake lever that can also turn the light on. Is the e-brake lever down all the way? If so, the switch or its wiring may have a problem. Or, there could be a short in the harness somewhere (difficult to track down, better get a wiring diagram!). Eric Law JeePerZPeePerZnopsam.net wrote in message <36d781e6.9211344nopsam.fuse.net>... >Brake fluid light stays on. 86, 900. > >I changed master cylinder, replaced fluid in resivoir. Have switched >leads to cap switch and even disconnecting leads...light stays on. >Any clues? >TIA >- > >NoN PrOgReTTi EsT rEgReTTi > >.