Date: Tue, 11 May 1999 07:34:00 GMT From: scoonopsamrr.com (Scott Levine) Subject: Re: Help, Anti Lock Brake Light Stays on
Thanks Scott I'll give it a shot. S.L. On Thu, 06 May 1999 11:27:35 -0600, Scott Nelsen <scottnopsamen.net> wrote: >Check the pressure switch connector to see that it's not broken. >(Basically, it plugs into the bottom of the brake fluid reservoir - I >assume this is right in front of the driver as it is on a 900.) I had >this happen on my 900 - the brakes worked fine while the ABS light was >still on but eventually it came loose and I lost ALL brakes (and just >about rear ended somebody). > >If this is the case, it's fairly easy to replace that connector without >replacing the entire harness (which is about a $400 job because that >harness runs all the way to the other side of the engine). If you do >this, you'll have to splice the wires then shrink-wrap the wires to seal >them from the elements. > >Scott Nelsen