Date: Thu, 19 Aug 1999 11:17:45 -0400 From: Scott FitzGerald <Scott.FitzGeraldnopsamc.ca> Subject: Re: HELP: Upgrade speakers for a '95 Saab 900/II SE convertible
The rears are 6x9s, but most will have to be bottom mounted (like my JVCs and my dad's Kenwoods); the bolt pattern is fine, but the cut out is just a bit off... Tweeters in the dash are fine. There's lots of room for anything - the space is designed for a 3.5" two-way, so you'll have to make an adapter. Easily done with some metal strapping - tweeters aren't very heavy... The doors are tricky; I never bothered measuring the bolt diameter, so it might be worth pulling off the door panel to check. See my other reply for more on door speakers. Maybe stop at a dealer and see if they have the SE upgrade kit available - you could measure one of the door speakers there. CVanhoven wrote: > > Hi! > > I want to replace all speakers in my 95 Saab 900/II SE convertible and need the > dimensions of the individual speakers. > As far as i know there are three systems: > - dashboard: 8.9 cm > - front door: 16.5 cm > - rear side: 16.5 cm > > Is this correct? Are the speakers DIN size? Does anybody know any other > information abot the speakers (depth, screw pisition, maximum magnet size > etc.). Has anybody replaced the built-in speakers with proper ones (i.e. Canton > RS2.16 etc.). Whic speakers? > > Questions, questions... > > :-) > > Chris
 |
 |
 |
 |
 |
