Date: Sat, 27 Nov 1999 16:30:52 -0700 From: "Ulf" <ulfnopsamng.org> Subject: Re: Mounting a CD changer in the '94 900s
Great. Thanks a lot, John. That's what I needed to know. I appreciate the help. Pete John R. Weiss <jrweissnopsamet*nospam*.com> wrote in message news:81ph97$q44$2nopsamanet.com... > I installed one in my '94. > > Saab sells a mounting kit. it goes in rather easily. The CD changer sits > vertically at the left rear of the trunk. > > The cable is behind the sidewall felt, but you have to peel back the rubber > edge gaskets and pull the felt away from the sidewall to find it stowed back > there (maybe coiled behind the antenna). > > You don't need to drill any holes, with the exception of a small one to > through-bolt the mount bracket and reinforce the double-sided tape they provide > (may have been fixed in current kits). > ----------------- > John Weiss > Seattle, WA > remove *nospam* from e-mail address for reply > > Ulf <ulfnopsamng.org> wrote in message news:#b9MpukN$GA.246nopsamnbbsa05... > > > I want to buy my own Clarion CD changer and install it > > > myself in my '94 900s coupe if possible. I read a very > > > helpful message posted to this group recently which gave a > > > detailed account of how to do this, but I'm still unsure of > > > a few things. > > > > > > 1) I am not sure exactly where the mounting location is (at > > > least where the dealer installers would put it.) > > > > > > 2) Also, where does the cable come into the trunk? I found > > > the little "hatches" cut into the felt-like plastic trunk > > > lining on either rear side of the trunk which seem to grant > > > access to the wiring for the tail lights. I reached into > > > this "hatch" on the driver's side and felt around back > > > towards where the antenna is a bit but didn't find anything > > > which seemed like the cable. Does one need to cut a hole to > > > get at this cable? > > > > > > 3) Is there a way to get mounting hardware for the changer > > > from Saab, for example would a dealer sell me this, or > > > does anyone know of a 3rd party manufacturer of such > > > mounting hardware made specifically for this car? > >
 |
 |
 |
 |
 |
