Date: Sun, 06 Feb 2000 23:38:34 GMT
From: "Karlheinz G. Schoenfeld" <kschoenfeldnopsamhlink.net>
Subject: Re: How do I reset Radio after dead battery?


Hi there, Actually, here's what our Clarion chart says: Turn radio on, press and hold BAND switch until CODE reappears. Then enter your correct code, assuming you have it, otherwise follow Malc's recommendations. Good luck. malcolm532nopsameja.com wrote: > <Snip> > Curt, > To clear an incorrect code you will have to disconnect the power again. > If you don't have the code you can try the following: > Contact the previous owner, see if they know it. > Contact the dealer who sold the car, they may have records > > Failing this you can take the radio out, sometimes the code is put on > it, not a good idea, but it happens. > Finally you can do what I had to do which was to take it to a specialist > radio shop who re-chipped it for me with a new code. Cost 30 pounds, > about 45 US dollars. > Hope this helps > Malc > Scotland > > Sent via Deja.com http://www.deja.com/ > Before you buy.

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2018 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]