Date: Tue, 28 Mar 2000 20:11:58 -0500
From: Stephen Whaley <whale100nospamnopsamspring.com>
Subject: Re: Saab clutch, Success!!! Where for mail order parts?


a whole new slave cyclinder is only about $50 and its a lot of trouble with out the clutch tools i went with a new one when i replaced my clutch stephen StepHydro wrote: > Wheeeee!!! I was able to push in individual spring fingers enough to free the > slave cylinder. The rest just fell out. > > The locating pins were sticking up nearly 12mm, and I suspect that they were > stopping the clutch disk from rising. After the flywheel is resurfaced, I'll > drive the pins deeper so as to just properly locate the pressure plate. > > Thanks all for helpful suggestions. > > Someone mentioned a mail order shop (maybe) in the Carolinas, USA which > provides a slave cylinder rebuild kit. Would you please tell the name and phone > number again?? > > Cheers/Carron

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2019 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]