Date: Sun, 16 Apr 2000 14:04:59 GMT From: rubidiumnopsamdnet.att.net (Jim Collins) Subject: Re: Brake lights not working
I have experienced this, symptoms are, when you put on the brake lights, all lights glow very dimly in the back. In my case, it was a corroded pin on the plug that goes into the taillight assembly. The ground wire goes from the left assembly to the left side of the cross member that splits the spare tire compartment into two. It also runs from the left tail light assembly to the right tail light assembly. JC > hello, > haven't experienced it myself but i have heard that there is a common > problem with the ground for the tail lights. you might check that first. > > -- > Nate t. G. > > > "Dennis Dowd" <dowddennisnopsam.com> wrote in message > news:ha9K4.54631$hT2.269716nopsam1.rdc1.ct.home.com... > > > > I have an 89 9000S and the brake lights do not work. The bulbs are OK - > no > > indication of a bad bulb on the pic-to-gram. I checked the switch at the > > brake pedal and it looks OK. Any ideas - Thanks. > > > > > > > > > > >
 |
 |
 |
 |
 |
