Date: Fri, 22 Sep 2000 19:25:32 GMT From: remco <remcownopsameja.com> Subject: Re: Bouncing thermometer reading
Thanks for that bit of advice, Dave. Where is the temperature sensor located? Is that that device mounted in line with the top radiator hose? Thanks! Remco In article <7C7314B1329DDCE9.D6F2E9B27CCD565F.0A5319FA507D1261nopsamirnews.net>, Dave <brandywinenopsameme.com> wrote: > I had a similar problem and my shop ended up changing a temperature > sensor. But the problem was also accompanied by incorrect cooling fan > operation as evidenced by coolant boiling over. Fortunately, we > suspect no engine damage. > > Like you're observing, the thermometer behavior was highly erratic. > Just a related anecdote for you. > Dave > > >Hi all > > > >On my '87 900 Turbo the thermometer bounces all over the place within > >fractions of seconds - sometimes it almost pegs but most of the time it > >sits around the middle. > > > >ThermoDynamics not allowing for those type of changes :), I am assuming > >it is a loose wire someplace. The other panel meters read normal so I > >am assuming the voltage regulator is ok. > > > >Are there multiple thermal sensors and where does one find the > >connections to them? > > > >RemcoW > > > > > > > > > >Sent via Deja.com http://www.deja.com/ > >Before you buy. > > Sent via Deja.com http://www.deja.com/ Before you buy.