Date: Sun, 25 Feb 2001 12:50:39 +0100 From: "Harrie van Dijk" <icu08140nopsamnet.nl> Subject: Re: blower only works on full
recently had the same problem on my 95 cs. Replaced the resistor with one from the scrap yard in under 10 minutes. It's working fine now. Note if you have a haynes manual don't follow it. The have it all wrong. You vcan acces the resistors straight away after removing the false bul head. No need to remove anything else beside the electric connector. Good luck Harrie home01 <home01nopsamorld.com> schreef in berichtnieuws 3_zl6.17110$MN.398242nopsam2-win.server.ntlworld.com... > the blower fan on my '91 9000 only works on full speed, it does not work at > all on 1-3. > If I remember correctly the 900 had a set of resistors for the 1-3 speeds > and a bypass for full speed. So extrapolating from the 900 it sounds as if > the speed resistors are at fault in my 9000... > please correct/confirm my diagnosis and point me to where the offending set > of resistors (or a fuse?) are located. > many thanks in advance > David > >