Date: Sat, 10 Mar 2001 20:15:13 +0100
From: "Arjen & Anette Nijhof" <a.nijhofnopsamet.nl>
Subject: Re: 85 900 ball joints


Why change the control arms are they damaged or so, or is it just cosmetic. As far is I can imagine you have to shim the control arms when putting some new ones or put back the old ones after removal so be carefull. The material is thick enough and some corrosion can do no harm. You can remove the corrosion and put some protective material on it. <dhansennopsam.saabnet.com> schreef in bericht news:988vk7$ebf$1nopsam.netmar.com... > I need to replace my ball joints. They're really worn and corroded, but so > are my control arms, so I was thinking I might as well replace the control > arms while I'm at it with some fresh-looking ones. According to the Haynes > manual, however, I'll have to take out the engine & transmission before > removing one of the control arms! That sounds like a ton of work. > > Saabster > 85 900 > > > > > ----- Posted via NewsOne.Net: Free (anonymous) Usenet News via the eb ----- > http://newsone.net/ -- Free reading and anonymous posting to 60,000+ groups > NewsOne.Net prohibits users from posting spam. If this or other posts > made through NewsOne.Net violate posting guidelines, email abusenopsamone.net

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2019 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]