The banner above is an advertisment - if it asks you to download software, please ignore.
Site News - 3/26 M Car Covers (by State of Nine) | 12/12 Make Amazon Pay Saabnet!
Date: Mon, 23 Apr 2001 03:07:02 GMT
From: TallWeed <tallweednopsam.com>
Subject: Re: saab calipers


"LisaMay!!" wrote: > to replace pads on 1990 900 tubo rear, what is best way to get the pistons > to retract, do they go straight in or twist in. Are there any special tools > just for that? > respond to: > jose120nopsamamusa.net > please remove "nospam" from address to reply I don't know about the 1990 900s but my 86 9000 had a retracting unit that worked like a charm. There was a small cover on the back side of the caliper. When you removed that cover, you could put an hex key in the hole and turn it to retract the caliper. I can't remember what size key but it sure made the job easy. I'd look on the back of the caliper to see if the 900 has either the same caliper or one with a similar retractor. Good Luck. I had a 1977 900 years ago but sold it for the 9000. I can't remember how those worked. I remember thinking how cool the 9000 caliper was so I'm guessing the 900 was the old twist-in type. Paul

Return to Main Index
StateOfNine.com
SaabClub.com
Jak Stoll Performance
M Car Covers
Ad Available

The content on this site may not be republished without permission. Copyright © 1988-2024 - The Saab Network - saabnet.com.
For usage guidelines, see the Mission & Privacy Notice.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]