Date: Tue, 14 Aug 2001 00:59:10 GMT From: "Dan" <dpoello1nopsamy.rr.com> Subject: Re: Removing a jammed sump plug from an OG 900
Easiest way to remove plug-cold chisel and hammer-comes right loose, two-three whacks. Next time-use 6-point 1/2 inch socket-never a problem again. But, mind the torque on tightening! "Dean Malandris" <rootnopsamus-technologies.com> wrote in message news:3b754a0c.5422532nopsam.zip.com.au... > Plug won't come out - putting the 13mm single hex socket on resulted > in the corners rounding - have managed to hammer on a 12mm single hex > but although it's finger snug, turning it with a ratchet instantly > strips the corners so again, no good. > > I was thinking of welding the 12mmm socket to the plug washer face so > I can get it off with the 1/2" drive. > > Any suggestions? I don't want to damage the sump.