The banner above is an advertisment - if it asks you to download software, please ignore.
Site News - 3/26 M Car Covers (by State of Nine) | 12/12 Make Amazon Pay Saabnet!
Date: 14 Dec 2001 16:46:55 GMT
From: davehinznopsamcop.net
Subject: Re: 1989 900S


DanB <meld_bnopsamo.com> pressed random keys until the following was produced: > The transmission will need some work eventually you have to yank the engine to > do the work. My tranny died at 180,000 miles or so, the mechanic changed it from beneath, without removing the engine. Saab sells a tool that spans from one wheelarch to the other, to hold the engine up for this. > The timing chain will > also need attention, mine is still hanging in there, but if it goes it takes > out the valves. It makes *lots* of noise to warn you long before that happens. My timing chain is original, at 240,000 miles. No problems. > The fuel system including computer, pump(s), relays needed a > lot of work in mine (and stranded me twice). If it's an original fuel pump you > can expect that to go.. mine went at 140K computer went at 178K. Haven't lost any of these, either. > My clutch is > original and I think the engine needs to come out for that too? Nope, I just did mine at about 210,000 or 220,000 miles, and you don't even have to take out the radiator. Turbo plumbing, plastic cowling, and it's right there. > My rack is > original but I've heard stories about that going too, I had the rack replaced with a rebuild at maybe 150,000 miles. They used a G.M. rack, and it develops leaks. The rebuild I bought was brass-sleved, so I don't expect to have to deal with it ever again. Not a DIY project, unless you're *way* more ambitious than I. > I greased the u-joints > going down to it and maybe that helped. The headliner will fall down, so you > have to decide how much you want to spend on that. NAPA (if you're in the USA) sells some headliner retainers, little button deals that screw through the fabric into the shell. Line 'em up nice, and it looks just fine, and owrks great. > There belt drive pulley > delaminates, which means belt squeal might not just be the belt slipping on > the pulley, rather it is the pulley coming apart! That was fixed way early ('85 or so I think?), so I don't think that's a concern any more. > I've never had any head > gasket issues, but I think there might be some sort of seal leaking slightly. I've never had to deal with anything in that area; haven't even had the valve cover off. The 900 isn't as much fun (to me) to drive as my Sonett, but it's a whole lot more practical, and certainly is fun in it's own right. Dave Hinz

Return to Main Index
StateOfNine.com
SaabClub.com
Jak Stoll Performance
M Car Covers
Ad Available

The content on this site may not be republished without permission. Copyright © 1988-2024 - The Saab Network - saabnet.com.
For usage guidelines, see the Mission & Privacy Notice.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]