Date: Mon, 25 Feb 2002 05:49:15 GMT From: "rws" <rws_1nopsamail.com> Subject: Re: cheap 3-wire Oxygen sensors
"Dave Wysocki" <MAPSdwysockiONnopsampc.com> wrote in message news:3c757917$0$18505$272ea4a1nopsam.execpc.com... > For anyone who's interested, it's previously been reported that any of > the 3-wire oxygen sensors used by Saab (the Bosch 0 258 003 xxx series) > can be replaced by the Bosch #13942, used in the '90 & '92 5.0L V8 Ford > Mustangs (Checker Auto uses the same part #, and sells it for about > $48). This sensor has a 6" lead with a very nice weatherproof > connector. The mating connector harness can be ordered through Ford for > about $13, and the part number is SS-J927082. On any turbo cars where > the O2 sensor is close to the turbo, it might be a good idea to use some > heat resistant fiberglass tubing over the connector. > > Dave Wysocki > '93 9000 CSE T, 200K miles > '84 900 S, 420K miles, RIP I did the same with the 88 900t. I was told that one was the same as a turaus - $32. I cut the old and new harness a few inches from the connector and wire crimped it together. Worked fine, passed emission, and never had a problem with it. Saab O2 sensors quoted at $135.00.