Date: Thu, 4 Jul 2002 17:54:11 +1200
From: "Martin Barnes" <marhilnopsam.co.nz>
Subject: Re: Glass mount cellular attenna removal


I have removed one using Dental Floss - worked well. Martin "John Davies" <johndaviesNOSPAMnopsam.net> wrote in message news:utl6iu4frvgm61gbtk4ofads2a6r0i2fs4nopsamcom... > On Mon, 1 Jul 2002 22:34:41 +0100, "Roger Hyde" > <rogerhydenopsamorld.com> wrote: > > >I am in the throws of restoring a '92 9000 CS Carlsson which has in the past > >been equipped with a celluar in-car kit. > > > >I have removedthe holder and harness, but there is a glass mounted antenna > >on the hatch glass that I would like to remove. > > > >Any ideas how I can get this ugly thing off without damaging the glass, it > >consists of a 2" square plate on each side of the window, the innner one > >connecting to the cable and the outer one to the antenna itself. > > > >Thanks > > > I suggest fishing line - the same method for removing stuck-on body > badges. Use some lacquer thinner or similar solvent to get off the > residue. If you need to scrape, use a sharpened piece of hard plastic > like plexiglass, not a putty knife, and you will not damage the glass. > > > John Davies > Monroe WA USA > > 2001 Saab 9-5 Aero Wagon > 2000 Audi A4 quattro 1.8T > 1991 Jeep Cherokee Laredo 4x4 >

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2018 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]