Date: Tue, 06 Aug 2002 22:28:30 GMT From: "scaredofthedark" <scarednopsam.net> Subject: Re: 94 9000 Aero boost problems
Bought the valve, installed it in 3 minutes and boost is back to normal. Chris "scaredofthedark" <scarednopsam.net> wrote in message news:28D39.113069$nm.4104342nopsam.nnrp.aus1.giganews.com... > I'm hoping someone can give me some difinitive information here. > > I've got a 94 9000 Aero 5 spd. Under load the boost is oscillating in and > out of the red. I'm leaning toward a faulty APC Valve/Soleniod, but would > like to get some more info before I drop $200 on one. > > I was told that I can check the valve by checking continuity between the > center pin on the valve to either of the outside pins, and that I should > obtain a reading of 350 Ohms. Is this accurate? If so that's where the > problem lies since I am reading 3 Ohms. > > Should the valve click by setting the ingnition to run? > > If I wanted to funx check the valve with power applied, is the 12V on the > center and GND on the outsides or vice versa? > > Thanx in advance, > Chris > >
 |
 |
 |
 |
 |
