Date: Mon, 26 Aug 2002 21:45:26 +0100
From: Grunff <grunffnopsam.com>
Subject: Re: dash/blower control


davehinznopsamcop.net wrote: >>I was messing around with my dash and while trying to put it back together >>the part the ataches to the blower, which is this foot long pole that turns >>the blowers to like front, defrost, ect...but I must have unhooked it from >>the dash way in there because its loose...is this hard to fix? > > > Any particular year or model? Well, it pretty much has to be a C900. I know 99s, NG900s, 9000s, 9^3s and 9^5s don't use a rod (can't comment on 96s and older). And all C900s used the same ba$t*** rod setup to control the heater valve. The answer is no, it's not hard to fix. Remove the speaker grille and take a good look - you'll be able to see the heater valve which the end of the rod goes on. The knob in question only controls the temperature, not direction etc. If your direction control knob is loose, then you've broken the switch; nothing to do with the rod. -- Grunff

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2019 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]