Date: Fri, 6 Sep 2002 15:34:15 +0200
From: "MH" <mhnopsamere.net>
Subject: Re: 1968 model 96 master cylinder


> When I pulled the master cylinder, I had to hone the cylinder due to = pitting > on the surface inside the barrel. I then used the rebuild kit you = speak of. If you are confident that you honed out all of the pitting, it may be = that there is still air in the system. Try bleeding the brakes again, on = all wheels. You may also want to subscribe to vintage SAAB newsletters on = http://www.nospam or http://groups.yahoo.com/group/vSAAB/ ------------------------------------------- MH '72 97 '77 96 '78 95 '79 96 http://go.to/saab96

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2019 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]