Date: Wed, 04 Sep 2002 20:20:14 GMT
From: "Richard Gostenik" <gstnknopsamdnet.att.net>
Subject: Re: Saab 9-5 front hub nut / size & torque specs please?


Dave, do you mean that I can just remove the calipers, the 4mm retaining screw and the brake rotor will be free? That I don't need to remover the hub nut? Thanks for you feedback on this... I am going to get into it this weekend. ~Rich <davehinznopsamcop.net> wrote in message news:al5kha$1mqhd3$2nopsam34476.news.dfncis.de... > Someone who looks an awful lot like Richard Chew <Richnopsameldo.demon.co.uk> wrote: > > The hub nut requires a 32mm socket. But you have to remove the hub nut > > to replace the front discs (rotors) on a 9-5. There is a single 4mm hex > > screw that holds the disc to the hub, when the wheel and caliper is > > removed that is. > > I think you mean "Don't need to..." take off the hub nut, right? > > Dave "Haven't looked at mine, but they've been good about this until now" Hinz > >

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2018 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]