Date: Tue, 3 Sep 2002 22:14:39 +0100
From: Richard Chew <Richnopsameldo.demon.co.uk>
Subject: Re: Saab 9-5 front hub nut / size & torque specs please?


The hub nut requires a 32mm socket. But you have to remove the hub nut to replace the front discs (rotors) on a 9-5. There is a single 4mm hex screw that holds the disc to the hub, when the wheel and caliper is removed that is. Hope this helps, Rich In article <9x5d9.8508$jG2.636743nopsamsc05-news.ops.worldnet.att.net>, Richard Gostenik <gstnknopsamdnet.att.net> writes >Greetings all. I am about to replace the front rotors (and brake pads) on >our '99 Saab 9-5 but I have had difficulty finding the size and torque specs >for the hub nut. Any help on this will be greatly appreciated. Rich >Gostenik - Littleton, CO. USA > > -- Richard Chew

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2019 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]