Date: Mon, 23 Dec 2002 20:32:51 +0100 From: "Johan Beikes" <j.beikesnopsamdoo.nl> Subject: Re: C900 Driveshaft Help
The sound is even more apparent, when accelerating during the turn. Johan "Grunff" <grunffnopsam.com> wrote in message news:au7n4b$5574u$1nopsam52899.news.dfncis.de... > Phil Brown wrote: > > > Vibration that increases with speed, changes with load change and wasn't > > changed by tire rotation and rebalance. > > Could be a CV joint, but could also be an inner driver. > > The way to test the CVs is to take the car to a car park, and > drive round and round in a clockwise circle (wheel at full > lock). Then repeat going anti-clockwise. If you have any play in > one of your CV joints, you'll get rhythmic > clicking/thumping/banging. > > If you don't, then it may well be the inner drivers. > > Either way, I'd always remove both shafts complete, clean them > up and examine them carefully on the bench. When you put them > back in, use 4 new boots. > > Good luck, and keep us posted. > > -- > Grunff > > >
 |
 |
 |
 |
 |
