The banner above is an advertisment - if it asks you to download software, please ignore.
Site News - 3/26 M Car Covers (by State of Nine) | 12/12 Make Amazon Pay Saabnet!
Date: Sun, 02 Feb 2003 19:24:08 +0000
From: Grunff <grunffnopsam.com>
Subject: Re: 9000 pictogram problem


andy smith wrote: > when you do you mean take all the bulbs out of the rear cluster and clean up > the bulb connection > terminals (indicator, reverse, fog etc - does the pictogram pick up on all > bulbs?) or just those for the rear light bulbs... > ....and/or are there other contacts to cleanup... The pictogram compares the current between corresponding left/right pairs (e.g. left brake and right brake). What you want to do is to insure that all the contacts (bulbs, cluster connector etc.) are nice and clean. > Also any details on "running new earths to the bodywork." If you look at the cluster, you'll see that there's a large ground plate, which provides ground to all the bulbs. This ground is then connected to one of the wires on the large connector on each cluster. Instead, you could connect it directly to a screw in the vehicle body. -- Grunff

Return to Main Index
StateOfNine.com
SaabClub.com
Jak Stoll Performance
M Car Covers
Ad Available

The content on this site may not be republished without permission. Copyright © 1988-2024 - The Saab Network - saabnet.com.
For usage guidelines, see the Mission & Privacy Notice.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]