Date: Sun, 16 Feb 2003 20:39:58 +0000 From: Grunff <grunffnopsam.com> Subject: Re: Little bit confused.
MeatballTurbo wrote: > On the throttle body of my 900 T16, I appear to have another hose > connector. Large bore hose, not the slim vacuum hose. > > It has a stub of hose attached to it but goes nowhere. > > On all the T16 engine pics I've seen, this isn't any of the normal ones. > It appears to be an extra connectoron the left hand side of the throttle > body (looking toward the windscreen). We could really do with a photo here... > I have tried to see if there is any blow or suck through this connector, > but there doesn't appear to be. > > Also where is the recirculating valve/dump valve on a T16. It's a pain to reach - it's approximately under the distributor. > Also along the edge of the cam cover (where the engine is canted over) I > have a whole bunch of cables wrapped up in a loom. There appear to be > about six electrical connections that don't have anywhere to connect to. > > Some appear to be ordinary spade connectors, but some are the plastic > covered saab ones. > > Everything appears to work as normal. All the insruments appear to > measure what they are supposed to. I'm more than slightly confused. There are usually a few spare loom ends in the engine bay, for things like aircon etc. I wouldn't worry about it. -- Grunff