Date: Mon, 03 Mar 2003 01:21:43 GMT From: "Greg Bender" <gregnospamoldtractor.com> Subject: Re: How to remove ront headrest - '89 900S
On my 1985 900S, I had the pull the seat cover off inside out as far as it could go. Then, with the headrest fully extended and the seat cover as far up as it could go, there is a screw (torx head) that is located in the center of the back of the seat. The screw is located in a slit in a piece of foam. You will have to look hard to find it. Remove this screw and then the headrest will come out. Hope this helps on your model. Regards, Greg Bender "geo" <nonospamom> wrote in message news:MLSdnec8fcSNAv-jXTWcoQnospamtnet.com... > I've tried to do the same with my 93 9000CSET. Apparently there is no way to > remove them easily. That would have been too logical for Saab. > > Natural Light Black and White Photography > http://www.phastnet.com/~geos/ > -George- > > "John D. Gardner" <jgardnernospamilot.org> wrote in message > news:yz68a.119547$xE6.50633nospam.atl2.webusenet.com... > > All, > > > > Any ideas how to remove the front headrest? It has a couple retaining > clips > > when the headrest is full up. Like to remove it to put a seatcover on. > > Thanks, > > > > JohnG > > > > > > > >