Date: Thu, 27 Feb 2003 19:53:10 +0100 From: "Simon Putz" <simon.putznospamline.de> Subject: weird apc
Hi, recently the difference between apc boost and base boost on my car was very small. ok i fumbled around with the hoses a bit and i broke off a little bit of a connector on the apc solenoid but that was nothign serious. so after some research i found that basically my apc solenoid is a switch that should switch between C-->R and C-->W. so i checked the solenoid out at home and i found that with +12VDC between pin 1 and 2 i can blow through C and W but with +12VDC between pin 2 and 3 i can blow through W and R now this is strange, did saab label my solenoid wrongly or whats going on. any help is greatly appreciated. im now going to install the valve as if W were C and keep you updated i uploaded some pics at http://80.86.187.144/apc bye simon