The banner above is an advertisment - if it asks you to download software, please ignore.
Site News - 3/26 M Car Covers (by State of Nine) | 12/12 Make Amazon Pay Saabnet!
Date: Sun, 20 Apr 2003 13:23:20 +0300
From: "Japso Punnonen" <baltika7nopsam.com>
Subject: 9000T16 stage1 problems


Hi, Saab-gurus! I have 9KT16, -87, with APC and mechanical distributor. I installed stage1 (Speedparts, Sweden), but the boost rises only to 1.0bar at max. Should be 1.2bar. Yesterday it climbed only to 0.8 bar. I tried to test knocking-solenoid, but even how hard I knocked the block, nothing happened.(ignition were switched on, I also tried it when engine were running.) Allthought car runs well, but the lack of power is obvious. Then I found the instruction to assembly a knocking light (led) to APC-control unit, but those instruction were to 900-model..didnt worked on my 9000. Have anyone installed the light to 9K? In 900 ledĄs negative wire goes to pin number 19, (in APC-box). Which number it is in 9K-model? I use 98 octane gasoline, even tried booster (octane were over 100), but there wasnĄt any difference. How can I test magnetic-valve? Thanks for the answers

Return to Main Index
StateOfNine.com
SaabClub.com
Jak Stoll Performance
M Car Covers
Ad Available

The content on this site may not be republished without permission. Copyright © 1988-2024 - The Saab Network - saabnet.com.
For usage guidelines, see the Mission & Privacy Notice.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]