Date: Fri, 27 Jun 2003 12:02:56 +0000 (UTC) From: "Saabtech" <saabtechnopsamnnect.com> Subject: Re: CHeck engine flashes four times on 91 9000, what does this mean
1 Switch on ignition, do not start. 2 Check engine light will come on for 6 seconds. 3 Comes back on for 3 seconds. 4 Goes off. 5 Flash code begins. 6 2 Flashes = Map sensor. 7 3 Flashes = Intake air temp sensor. 8 4 Flashes = Engine coolant temp sensor. 9 5 Flashes = Throttle position sensor. 10 6 Flashes = Oxygen sensor. 11 7 Flashes = Adaptation. 12 8 Flashes = EVAP can purge valve. 13 9 Flashes = Control module Internal fault. 12 Disconnect battery earth lead for 5 minuets to clear code. 13 Carry out adaptation. Regards, Tom, Saabtech. "Andy Hookins" <andrew.hookinsnopsamamnopsamodata.co.uk> wrote in message news:vfnsoc558p9nabnopsam.supernews.com... > "Mark Plumlee" <turbospgnopsamsouth.net> wrote in message > news:6ZRKa.79804$X43.17993nopsamoh1-nws5.columbus.rr.com... > > have u tried calling a saab dealer in your area? > > The dealer may want you to think that is what it means ;-) > > Buried somewhere in the Townsend site is an explanation > of the flash codes for some cars - seems to be down at > the moment though :-( > > http://www.townsendimports.com/ > > AndyH > '94 9000 CDE > > > > > > > "Jim Collins" <rubidium7nopsami.com> wrote in message > > news:MPG.19656ddf33b375159896e8nopsamews.attbi.com... > > > WHen I get in to start it, after the computers boot up, I get an ERR in > > > the info display and a CHECK ENGINE that blinks four times. Car seems to > > > run fine. DOes anyone know the meaning of this secret code ? > > > Thanks > > > JC > > > -- > > > Jim Collins > > > Issaquah, WA > > > > > >
 |
 |
 |
 |
 |
