Date: Sun, 27 Jul 2003 01:25:33 GMT From: Doug Schwarz <seenopsamfor.address> Subject: Re: Vibration when braking?
In article <3F21428A.A2A1D8B8nopsamlamelame.org>, Dexter J <lamealameadingdongnopsamlamelame.org> wrote: > I have a twist on that.. When I'm braking (89 9000T CD) I get a light > vibration in the wheel - but as I apply the brake harder it goes away.. I > also have a worn - although not really badly yet - control arm bushing(s).. > I had assumed it was a rotor until I replaced my front ones and it didn't > go away.. We had that problem in a 95 900S only it was severe! We also had a little free play in the steering which made the car wander a bit and made it take a lot of concentration to go straight. After several visits to the shop it was finally determined that a tie rod end was worn and after its replacement both problems went away completely. -- Doug Schwarz dmschwarz&urgrad,rochester,edu Make obvious changes to get real email address.