The banner above is an advertisment - if it asks you to download software, please ignore.
Site News - 3/26 M Car Covers (by State of Nine) | 12/12 Make Amazon Pay Saabnet!
Date: Mon, 04 Aug 2003 20:27:32 GMT
From: 'nuther Bob <yetanotherphonyaddressnopsamacereally.com>
Subject: Re: Brake/Suspension Problem on 2002 9-3


On Mon, 04 Aug 2003 19:24:20 GMT, "Gozer" <gozernopsamon4.com> wrote: >Which upper bearings and washers are you suggesting? Sorry, I'm still >learning since my upgrade from my 900 to my 9-3. I'll spend some time with >my parts diagram CD to see if I can find related parts. Take a look at this diagram. It's for the NG900, but the parts are the same: http://216.78.172.32/suspension_folder/ng900ftsuspg1.htm The washer shown as #1 is known to bend, it should be flat. The bearing is #3 in the diagram. I also heard some stories about the zinc "spacer" which is #7 in the diagram. I think #1 is about $1, #3 is about $33, and #7 is about $7 (each, per side). If you are doing all the work you mentioned, then you might want to just replace them. I know that some folks have replaced #2 also - the upper mount. I didn't price that one as mine looked OK. I think you can get them from a place like tirerack (if you're in the USA). Bob

Return to Main Index
StateOfNine.com
SaabClub.com
Jak Stoll Performance
M Car Covers
Ad Available

The content on this site may not be republished without permission. Copyright © 1988-2024 - The Saab Network - saabnet.com.
For usage guidelines, see the Mission & Privacy Notice.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]