Date: Tue, 19 Aug 2003 00:10:29 GMT
From: 'nuther Bob  <nooneyetnopsamhere.net>
Subject: Re: 1999 9-3 Reverse question 5-sp manual


On Mon, 18 Aug 2003 23:50:51 GMT, "quadrun1" <quadrun1_DELETE-THIS_nopsamnline.net> wrote: >Also try this: > >Put it into first gear, let the clutch up briefly to the friction point (but >don't stall the engine), push in the clutch, and shift into reverse. > >Jason > Just putting it in first without letting up on the clutch should be enough to cause the syncro's to stop the shaft. As long as you _don't_ let up on the clutch then there should be no movement at that point and it should go in - unless slight (temporary) misalignment of the gears is the issue. BOb

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2018 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]