Date: Sun, 19 Oct 2003 22:01:06 -0700 From: Tony Aalvik <aalvannopsamedu> Subject: 9000 clutch into 900 8v turbo.
To accompany engine performance upgrades on a 900 8 valve turbo, I have heard of the practice of installing a flywheel and clutch from a 9000 model. I would like to hear from someone who is familiar with this practice as far as level of difficulty, parts that are needed, and essential steps to consider in performing such a conversion. Would it matter if the flywheel and clutch were from a 2.0L or 2.3L engine, are there problems to deal with such as proper engagement of the starter, and are there WWW sites posted addressing such a conversion? I suspect the flywheel should be lightened. Thanks for any knowledgeable replies, Tony