Date: Sun, 14 Dec 2003 00:31:24 +0000 From: Grunff <grunffnopsam.com> Subject: Re: minor coolant leak?
John B wrote: > Hi folks, > > I was just topping up various fluids today when I noticed a bit of fresh > coolant on the flywheel cover. I think it might have dripped down from the > short, L-shaped piece of hose right where the coolant enters the cylinder head > (c900). The clamps are rather rusted, and the hose is probably old. So I think > I might as well replace it before it gets worse (hose is cheap, right?). > > My question is this: Do I need to drain the coolant to replace the hose at this > spot? I don't want to open the clamps and have coolant pour out everywhere. You don't need to drain down completely, but you do need to drain at least 3-4 litres if you don't want any spillage. Personally I wouldn't bother - I'd just put a tray under the front and undo the hose. If the coolant is more than a year old drain it down and replace while you're doing this - it makes sense. -- Grunff
 |
 |
 |
 |
 |
