Date: Fri, 16 Jan 2004 15:36:51 +0100 From: "Kristian Steve Jensen" <dat0hksjnopsam.hitos.no> Subject: Re: 9000 Clutch/Flywheel
"Simon Putz" <simon.putznopsamline.de> skrev i melding news:20040116140755.2468479d.simon.putznopsamline.de... > Hi, > > i finally found some time to take the gearbox out, and i found the clutch > in a pretty devastated state, there were metal bits and plates all around :) > so i have a 2.0T, but i would like to install the clutch from a 2.3T, > my clutch has a diameter of 228 mm, the one of the 2.3 would have 240mm, i cant > quite imagine that fitting on the flywheel i have now, so my questions: > > is the 2.0 flywheel different from the 2.3 flywheel? > will the 2.3T (240mm) clutch fit on my 2.0 flywheel? > where can i get a 2.3 flywheel and how much can i expect to pay? > will the 2.3 flywheel fit? i think spline is the same and as everything > -93 is supposed to be compatible in that area this is not going to be a problem. > > reason for this upgrade is that the torque my engine is putting out > is probably too much for the smaller, weaker clutch. > How about an uprated clutch for a 2,0T instead? Kristian