Date: Fri, 5 Mar 2004 09:40:38 -0000 From: MeatballTurbo <carl.robsonnospamcing-czechs.com> Subject: Re: '94 900 overheating
In article <1bOdnTe7zPMMYdrdRVn-vgnospamphia.com>, Fred.Willsnospampam says... > Some configurations from around that time period used a dual temperature > switch / fan configuration. It may be worth investigating to see if maybe > you fan works at high temp/speed, but not the lower temp/speed. There are > lower temp switches available which are generally considered a good upgrade. > Also, you can check if the fan is working by using a paperclip/screwdriver, or piece of stiff wire to bridge across the switch terminals If the fan starts when you do that, and stops when you remove the jumper, then either the switch no longer functions, or is too higher a temperature than you need. -- The poster formerly known as Skodapilot. http://www.bouncing-czechs.com
 |
 |
 |
 |
 |
