Date: Mon, 19 Apr 2004 05:06:06 -0400 From: itten <ittennospamast.net> Subject: Re: Top not operating
Got It. It was the fuse after all and it was under the hood near the passenger side . It's working fine now. In article <TYDgc.50067$K_.1132648nospamsc05-news.ops.worldnet.att.net>, "JLVenable" <Jonboy3nospamanetnot> wrote: > NP, OBTW, you do have a later model than I, your fuse may finally have been > put in th Panel.... > "itten" <ittennospamast.net> wrote in message > news:180420040914549593%ittennospamast.net... > > Thanks. I found it this morning after a little digging. > > I'll check that fuse. > > > > > > > > > > In article > > <2Lkgc.42382$i74.1057744nospamsc04-news.ops.worldnet.att.net>, > > "JLVenable" <Jonboy3nospamanetnot> wrote: > > > > > Open the Trunk, look at the right forward corner, behind a flap of > carpet > > > in a cutout is a small valve, turn it counterclockwise all the way, then > you > > > can manually put the top up. The fuse is not in the fuse box, look on > the > > > right (Passenger side) of the engine compartment, black wire with a fuse > > > case on it, should be labeled. And don't forget to restore the valve > when > > > you want to use the top electrically again, > > > > > > good luck, JV > > > "itten" <ittennospamast.net> wrote in message > > > news:170420041744198347%ittennospamast.net... > > > > I have a '94 900 Conv. and the top will not come up with the switch > > > > anymore. I haven't checked the fuses yet, but I want to know if I > > > > can't get it up electrially, if there is a way to manually put the top > > > > up? Help!
 |
 |
 |
 |
 |
