Date: Fri, 21 May 2004 12:10:00 GMT From: "Keyser S–ze" <faradayincNoSpamnospamail.com> Subject: Re: Head gasket replacement
"Richard Sutherland-Smith" <richard.ssnospamr.net.nz> wrote in message news:c8da3db24c.Richardnospamard.ss.clear.net.nz... > In message <fJydnaIUW41kUjHdRVn-tAnospamphia.com> > "Fred W." <Fred.Willsnospampam myrealbox.com> wrote: > > > > > "Kristian Steve Jensen" <dat0hksjnospam.hitos.no> wrote in message > > news:2h29q3F811l4U1nospamberlin.de... > > > It looks like my 1988 Saab 9000i with barely 339000 km's on it needs a new > > > head gasket. I will take the necessary steps to be sure that it is the > > > gasket, but if it is, is this feasible to do by yourself? I have the > > Haynes > > > manual, and it looks pretty straightforward, but are there any other > > guides > > > somewhere on the internet? I would like a second opinion, as Haynes cannot > > > be trusted 100% of the time. Have any of you followed the Haynes manual to > > > the letter, or have you developed your own routine? > > > > Yes. Been, there. Done that. The engine thanked me for it... > > > > It is fairly straightforward and does not require any specialty tools beyond > > a torque wrench. > > > > While you are at it, I would recommend pulling the timing cover (while you > > have the head off, it is easier) and check/replace your chain(s) guides and > > sprockets if they are worn. > > > > -Fred W > > > > > Yes you do, you need an external TORX E-16 socket to undo the head > bolts. > http://216.78.172.244/engine-folder/headgasket90016v.htm > This describes the 900 version of the engine and is very good. This plus > Haynes is enough. > -- > > Richard & Mary Sutherland-Smith > 19 Webb Road, Wanganui > New Zealand Hi Richard. I can't get the link to work.
 |
 |
 |
 |
 |
