Date: Sun, 14 Nov 2004 07:45:55 -0500 From: KeithG <noonenospamay.com> Subject: Re: Fitting CD changer advice sort
I do not know what year it is, but I have done this in a '95, '96 and '97 CSE (hatch). There are a number of Clarion changers which are 'plug and play', requiring that you only find the cable end in the boot area (the CSE is in the left rear fender (wing?) and that is where you mount the changer), plug it in and secure the changer. This means no power line running and no putting up with poor sound when using a changer that broadcasts on an FM frequency, etc. The EPC is not clear, but my '97 9000 sales brochure claims that all 9000s are wired for a changer. The cable is a large one (~3/16" diameter) with a high density of pins (maybe 15?) In a CDE, the best location may be under the rear deck where the speakers are mounted. HTH KeithG chris wrote: > Hi Gang > > I'm about to install a CD changer in the boot area of my 9000cde saloon. its > a RHD. > Does anyone on this forum's vast knowledge base have any previous > experiance's, if so, what is the best way to route the cables, best > location in the boot etc ? > I dont want to repeat others mistakes etc. > > Thanks in advance Chris. > >