Date: 21 Nov 2004 06:05:45 GMT From: Dave Hinz <DaveHinznospamcop.net> Subject: Re: C900 front rotor screw size?
On Sun, 21 Nov 2004 03:17:23 GMT, Dexter J <lamealameadingdongnospamlamelame.org> wrote: > > Well that is novel, thank you very much for the pix on it. I think I will > do the same next time I have to do the rotors. Very sensible solution to > the problem. For the record, I got all 4 torx bolts out of the front rotors on the '86 today, with _zero_ grunting, swearing, penetrating oil, or anything. Wrench in, twist, click, "that was easy". All 4 brake bleeder nipples loosened fine too. Brakes are still crap; the pedal is soft and goes all the way to the floor slowly, although I'm not losing any fluid. I assume this is master cylinder rebuild time. Anyone have a goood online DIY guide for a vacuum-assisted Saab c900 brake master cylinder? I already know I can't just take it off the front of the booster with the two bolts which look like the obvious method. Dave Hinz