Date: Tue, 4 Jan 2005 20:00:47 -0500 From: "dave" <alofusblountmaybenospamel.net> Subject: Re: dome light update (c900)
"John B" <rotten_NOSPAM_nospam.org> wrote in message news:slrnctltep.b5a.rotten_NOSPAM_nospamam.example.com... >A bit more info on my dome light problem (see also my original thread, >"dome > light poltergeist"): > > The light now stays on constantly when the switch is in position 1, > however, it > goes off when the switch is in position 0. Essentially, position 1 is now > behaving as position 2 usually does. Any ideas on this? > > Thanks, > > John I had a problem with the dome light delay relay. There was a bad transistor in the relay assembly. The interior lights acted like there was a door open all the time. This drove the lock system and the alarm system crazy. I had to replace the faulty transistor in the relay, it was shorted. The fix was a piece of cake. I used a junk 2n2222 xistor from some dead dammit in the parts donor pile. The fix has been working fine for almost 2 years now. dave