Date: 27 May 2005 13:59:51 GMT From: Dave Hinz <DaveHinznospamcop.net> Subject: Re: 9000 Rotors
On Fri, 27 May 2005 00:13:10 GMT, Dan <danandmary3nospamail.com> wrote: > I'm changing out the rotors on my 91 9000 Turbo. I've removed the screw and > alignment post from the face of the old rotor - but the rotor won't budge! > Is there something I'm missing? You've removed all the fasteners you need to - it's now just a rust situation. If you have a large gear puller, now is a good time to use it. Stand back, tighten it until it's tight, wait...lather, rinse, and repeat until you get a "ka-thwang" which will hopefully be it coming loose rather than it breaking into pieces, which makes it trickier. I wouldn't use much heat, and don't hammer on it unless you don't like your wheel bearings much. Dave Hinz
 |
 |
 |
 |
 |
