Date: Tue, 23 Aug 2005 23:34:01 +0100
From: Colin Stamp <col.dustbinnospamp.plus.com>
Subject: Re: Help me out: only high beam on 1 headlight?


On Tue, 23 Aug 2005 23:32:34 +0200, "BasMan" <nobodynospamere.com> wrote: >Strange.... Someone flashed me that only one headlight was working. So the >next morning I changed the bulb for a new one, but still no headlight. >Strangely, when I turned on the high beam it was working! But on normal >(dimmed) beam, there's no light. I checked the 3 pin connector with a volt >meter and I had a readout of 11,4 volts (or something). >So.... Does anyone have an idea what I can do next? I would be very grateful >for any suggestions. > I'm assuming your car doesn't have a light failure warning system with the infamous, duff sensor, or it would have warned you rather than someone else having to flash you. Most likely problem is a blown bulb. Cheers, Colin.

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2019 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]