Date: Sat, 03 Sep 2005 22:19:12 -0400 From: S R Sharp <aiglosnospamtal.net> Subject: Re: headlight adjuster bushing
Jim wrote: > Hmmm, this sounds like the adjustment nut retainer is broken to yeild > that much movement. Normally if the snap bushings (pic from The Saab > Site) are cracked or worn, you get just a little bit of movement. The > nut is plastic (I believe) and retained on the headlight housing. If > you move the housing the half inch, can you see the nut on the > adjustment screw and is it separated from the housing? The end of the > screw snaps into the bushing and pivots the headlight in the housing. > This is what was wrong with mine along with worn bushings. Didn't get a chance to look at it today, have to wait for the sun to come back up. I should've specified in my last post that the "lefts" and "rights" I was referring to were looking at the light assembly from inside the engine compartment (the back of the light). ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =----