Date: Tue, 04 Oct 2005 13:23:23 +0100 From: Grunff <grunffnospam.com> Subject: Re: C900 clutch pedal linkage play affecting Cruise Control
Al wrote: > I don't think it's the pin, more the holes in the u-shaped bit of the > link, but I haven't actually checked. By pin I meant the rod with the bracket through which the 'pin' goes. This rod pushes the piston. > If it is the pin I'll get one > made for nothing by my lathe crazy Dad! If its the U link, I'll bodge > it with correctly sized washers and epoxy. Not spending £50+ for a > bit of clutch play! I wouldn't go down the washer route myself, unless you weld them on. I'd be more inclined to pick up a cylinder from a scrap yard. > I haven't sourced a new cruise switch yet so it's pretty irrelevant in > the grand scheme of things. And get the switch from said scrap yard at the same time as the cylinder :-) > Thanks for the input, always appreciated. Always welcome. -- Grunff