Date: Mon, 03 Oct 2005 23:01:54 -0600
From: Charles <cstoyernospamrpex.com>
Subject: Re: C900 clutch pedal linkage play affecting Cruise Control


I find that the switches on the brake and clutch need to be periodically repositioned. Also I have had to plug in the speed sensor on the back of the speedo a couple of times. this is accessed through the speaker grill. Charles Al wrote: > My 1987 900 Aero is a RHD UK spec version. > > Whilst running through the Bentley Cruise Control (CC) checks on Sunday (CC > not functioning) I discovered the linkage to the slave(?) cylinder from the > pedal on the passenger side of the car is very loose. Its quite competent, > but this play could potentially mess up the settings, esp. electrical, of > the CC pedal switch. i.e. if I accidentally knocked the pedal up, it could > knock the pedal switch out and disable CC. The pedal switches are a git to > get at, as I had to remove the knee board. > > Question is, can the linking "u" connector on the slave cylinder be replaced > easily? It seems to be all one piece or am I missing something here? should > there be some play? > > Bottom line is my CC stalk is not functioning correctly anyway but I can > replace that and everything else seems to work, although there seems to be > no test for the CC module itself, other than check supply and ground. I > guess if everything else is functioning and it still doesn't work it must be > the module. > > Thanks > > Al > > P.S.Go my JT 61 K exhaust from Elkparts today, whoooeee it's a monster! > Can't wait to get it fitted! > >

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2019 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]