Date: Mon, 03 Oct 2005 10:41:21 +0100 From: Grunff <grunffnospam.com> Subject: Re: Clutch Slave or piping?
LC wrote: > I recently replaced my clutch master cylinder. I'm getting conditions where > my clutch sticks, can't pull the car out of gear, etc. What does the pedal feel like? Do you get constant resistance all the way from (pretty near) the top of the travel to the bottom, or is there a long part of the travel with no resistance, followed by resistance half way down? Go have a feel, and try to describe it as accurately as possible - it will help us figure out what's going on. > There's always a > nice little puddle of hydraulic fluid. Where? When? > Any ideas? Need more info. > Also.. any ideas what I might look at to have someone do it for > me? I could pull, and reseat the slave and clutch. Problem is, I can't > pressure bleed the thing.. I don't have the equipment. You can make a very, very good pressure bleeder from a £10 garden sprayer. We've described this on this ng quite a few times - worth googling for. -- Grunff