Date: Fri, 07 Oct 2005 20:29:45 -0600 From: Charles <cstoyernospamrpex.com> Subject: Re: Clutch pedal free play C900...
The C900 is notorious for wear in the hole in the clutch pedal mechanism itself. It is common to weld the hole shut and drill a new one. Also, the pin that goes in this hole can wear as well. My advice is to get this fixed before shifting into reverse ruins the transmission as it did on mine. Check the clutch pedal mechanism for wear and get under the dash and see if depressing the clutch pedal has a lot of play before the hydraulic mechanism is actuated. Charles. NeedforSwede2 wrote: > My clutch pedal in the cab seems to have more free play than actual > travel. > I've got reciepts in the wad that came with it for a fairly recent > clutch and a rebuild kit for the slave cylinder. > > Clutch action seems fine, but the bite seems low but not ecessively low. > Fluid level is good. > > Any thoughts >
 |
 |
 |
 |
 |
