The banner above is an advertisment - if it asks you to download software, please ignore.
Site News - 3/26 M Car Covers (by State of Nine) | 12/12 Make Amazon Pay Saabnet!
Date: Mon, 30 Jan 2006 18:23:02 +0000
From: Colin Stamp <col.dustbinnospamp.plus.com>
Subject: Re: Mildly entertaining SID tale


On Mon, 30 Jan 2006 02:02:05 GMT, "Bill Jackson" <wjacksonnospamesterdotrr.com> wrote: >oh yea, you're right. > >The issue (at least with mine) was not the glass end but the PCB end. There >is WAY too much strain on the flex and it causes delamination of the >conductors, which then break. > >sorry for the confusion > Yep. I think mine failed the same way. I had it powered up on the bench and pushing on the contacts didn't bring the pixels back, but flexing the cable did. I just couldn't find a cable position that allowed it to work reliably with the case on. Other's have said they've had good results just by increasing the pressure on the contacts though, so either there's another failure mode, or the cable disturbance is randomly sorting some units out. Cheers, Colin.

Return to Main Index
StateOfNine.com
SaabClub.com
Jak Stoll Performance
M Car Covers
Ad Available

The content on this site may not be republished without permission. Copyright © 1988-2024 - The Saab Network - saabnet.com.
For usage guidelines, see the Mission & Privacy Notice.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]