Date: Sat, 30 Sep 2006 03:59:47 GMT
From: - Bob - <uctraingnospamanet.com>
Subject: Re: '94 900S - How to remove dash


On 29 Sep 2006 13:52:55 -0700, don.schencknospaml.com wrote: >NEVER MIND. > >Saabnet is my new friend! > I recommend you purchase a Haynes Manual to do this job. You will still spend some time looking for all the screws. I forget how many there are (9? 12?) but you have to locate them all. Onto more specifics - you can pull the SID and the radio without removing the dash as well as just about everything else except the instrument cluster. - the dash pull and re-install takes about 4 hours to do (consider yourself warned :-). - Put wire ties into the vents and around those little grids and tie them tight at the top and bottom. Get it around the center/cross bar and it will hold the assembly together.

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2018 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]