Date: Sun, 24 Sep 2006 19:14:40 GMT From: "J. Harris" <jackharrisnospamct-o-cutor.comdamnspam> Subject: Re: Emissions & DIC
> There is no camshaft position sensor on the engine. The DIC does the > sensing through some process I've never quite understood. So, if you > get that code, it is either the DIC or the plugs. > > If you used the stock NGK plugs, then it is possibly the DIC. If you > used some other plugs, change them to the right one. The DIC is a 10 > minute DIY job - the torx driver is in the trunk. > > You do not have to rest the computer, it will reset itself. In fact, > in some states you can fail for have a computer that was reset too > recently. Thanks Bob (Fred too); the plugs were stock... Looks like its time for eBay for a DIC! -- J.Harris '01 9-3SE '97 900SE '88 9000T (R.I.P.)